Amatista Style - Small Custom Size 2" in Height
The Amatista Style is designed for the storage of earrings, rings, or cuff-links. In this jewelry display tray each small compartment measures approximate 2 1/2" wide x 2 1/2" deep. These dimensions may change depending on the size of the tray.
(Please refer to "Description" below for details on how to order).
Product customizationSpecify the dimensions to manufacture your tray. State which dimension is the Width (side to side) and Depth (front to back). Don't forget to save your customization to be able to add it to your cart.
The Amatista Style - Small Custom Size 2" in Height, Tray
Can only be manufactured in the Size ranges specified under "Product Customization". See below for Details:
The Width (side to side) can only be manufactured starting at 8" all the way up to 15 7/8".
The Depth (front to back) can only be manufactured starting at 8" all the way up to 17 7/8".
The Width and Depth Fraction refers to the measurement in between each INCH:
0.125 = 1/8; 0.250 = 1/4; 0.375 = 3/8; 0.5 = 1/2; 0.625 = 5/8; 0.75 = 3/4; 0.875 = 7/8
The Height for this tray is 2" in height.
We recommend for you to take off 1/8" (0.125) from the EXACT measurements of the inside of your drawer to make sure this tray will slide-in without forcing it.
For example: If the inside of your drawer measures:
14 1/2" Wide x 13 7/8" Deep.
Then you will type your measurements taking 1/8" off:
Width = 14
Width Fraction = 3/8"
Depth = 13
Depth Fraction = 3/4
*If you need a bigger size than the sizes specified above, please note we also manufacture this tray style in Medium, Large and XL sizes. Hoover with your mouse on the "Styles" tab on the top of this page and scroll down to "Amatista Style" to see the other sizes.