Diamond Style - XL Custom Size 2" in Height
The Diamond Style is our best design for large size drawers. This velvet jewelry tray holds compartments for long and short necklaces, bracelets, bangles, earrings, rings, and watches. It is our most popular design for high-end closet designers! Our jewelry organizers are made in The USA.
(Please refer to "Description" below for details on how to order).
Product customizationSpecify the dimensions to manufacture your tray. State which dimension is the Width (side to side) and Depth (front to back). Don't forget to save your customization to be able to add it to your cart.
Diamond Style - XL Custom Size 2" in Height Tray,
Can only be manufactured in the Size ranges specified under "Product Customization". See below for Details:
The Width (side to side) can only be manufactured starting at 30" all the way up to 36 7/8".
The Depth (front to back) can only be manufactured starting at 12" all the way up to 17 7/8".
The Width and Depth Fraction refers to the measurement in between each INCH:
0.125 = 1/8; 0.250 = 1/4; 0.375 = 3/8; 0.5 = 1/2; 0.625 = 5/8; 0.75 = 3/4; 0.875 = 7/8
The Height for this tray is 2" in height.
We recommend for you to take off 1/8" (0.125) from the EXACT measurements of the inside of your drawer to make sure this tray will slide-in without forcing it.
For example: If the inside of your drawer measures:
33 1/2" Wide x 17 7/8" Deep.
Then you will type your measurements taking 1/8" off:
Width = 33
Width Fraction = 3/8"
Depth = 17
Depth Fraction = 3/4
*If you need a smaller size than the sizes specified above, please note we also manufacture this tray style in Small, Medium, and Large sizes. Hoover with your mouse on the "Styles" tab on the top of this page and scroll down to "Diamond Style" to see the other sizes.